
Engineered for the highest levels of performance and reliability, Viking Technology Element SSDs feature a native 3Gb SATA interface and an advanced parallel NAND channel architecture that delivers best-in-class performance for streaming & I/O intensive applications.
Element 2.5” SSDs feature an unparalleled host toNAND write amplification efficiency, for unprecedented endurance. Coupled with patented error detection/correction capabilities and protection against normally catastrophic flash failures, Element’s architecture enables MLC flash technology for enterprise applications.
![]() |
|
| Capacity | |
| SLC | 50GB to 200GB |
| MLC / eMLC | 50GB to 400GB |
| Performance | |
| Sustained Read / Write | 260 MB/s |
| Sustained Random Read & Write IOPS | Up to 30,000 IOPS |
| Interface | SATA 3Gb/1.5Gb, S.M.A.R.T., NCQ, hot pluggable |
| Reliability | |
| ECC | Up to twelve 9-bit symbols per 512 byte sector |
| Bit Error Rate (BER) | < 1 in 1017 bits read |
| Power Fail Data Protection | Super Capacitor |
| Tiered Error Protection | Data recovery from sector, page, and block failures. End to end CRC protection. |
| Endurance | 5 Years * |
| Temperature Monitoring | On-board sensor, SMART attribute |
| Environmental | |
| Shock | 50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular axes X, Y, Z |
| Vibration | 16.4g rms 10-2,000 Hz, 3 axes |
| Operating Temperature - Commercial | 0°C to 70°C |
| Non-operating Temperature | -40°C to 85°C |
| Altitude | 80,000 feet |
| Humidity | 5% to 95%, non-condensing, relative |
| Test Standard | MIL-STD-810F |
| Safety / Agency Compliance | FCC, CE, TUV |
| Power | |
| Voltage | 5V + 10% |
| Active | 2.0 watts |
| Idle | 0.9 watts |
| Dimensions | |
| Length | 100.2mm |
| Width | 69.9mm |
| Height | 9.5mm |